Stages Cycling Store/STAGES POWER/SHIMANO products

Stages Power L - Shimano DXR MX71 0,00 €

Sat, 26 May 2018 06:01:43 +0200

The new single-sided Stages Power L meter is built on to a non-drive-side Shimano DXR MX71 crank arm and is compatible with all Shimano DXR or Saint Hollowtech II drivetrains.

Tour Proven

Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter.

Active Temperature Compensation as standard equipment

Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions.

Individual meter calibration for the most accurate results

Each Stages Power meter is calibrated individually to ensure a +/- 1,5% accuracy level, which is an industry best for non-scientific power meters.

Specifications

Accuracy	+/- 1,5% accurate in all conditions
Power meter housing	low profile design, with robust door interface. Tool free battery replacement on the left arm
Weight	Only adds 15g to base crank set
Battery life	200+ hours (coin cell: CR2032) when used as a single sided meter
Power range (Watts)	0 - 2500
Cadence range (rpm)	20 - 220
Water resistance rating	IPX7

Options

Crank length	175mm, 180mm

Additional Features

Active temperature compensation

Accelerometer based cadence measurement or the option to use a Hall-Effect based system with magnet (coming soon)

Wirelessly upgradable firmware

LED indicator for visual indication of battery levels and zero reset confirmation without connected app or headunit

Updated accelorometer and addition of gyroscope for improved cadence resolution

NFC tap to pair for some phones and devices

Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength

Compatibility

Crank Compatibility	Compatible with Shimano DXR or Saint Hollowtech II drive side crank arms.
Frame Compatibility	Most frames, see fit guide in our Support section
Software Compatibility	Stages Link, Training Peaks, Strava, Garmin Training Center and others
Device Compatibility	ANT+, Bluetooth Smart Ready

In the Box

Power meter

High quality CR2032 coin cell battery

Lifetime access to Stages Link for power meter management and firmware upgrade

2 months free access to Stages Link premium training and coaching features

Product Identification Card with Serial Number and ANT+ ID Number

User Guide

Stages Power L - Shimano Dura-Ace Track 0,00 €

Tue, 26 Jun 2018 11:58:06 +0200

The new single-sided Stages Power L meter is built on to a non-drive-side Shimano Dura-Ace Track crank arm and is compatible with Shimano Octalink drivetrains.

Tour Proven

Active Temperature Compensation as standard equipment

Individual meter calibration for the most accurate results

Each Stages Power meter is calibrated individually to ensure a +/- 1,5% accuracy level, which is an industry best for non-scientific power meters.

Specifications

Accuracy	+/- 1,5% accurate in all conditions
Power meter housing	low profile design, with robust door interface. Tool free battery replacement on the left arm
Weight	Only adds 15g to base crank set
Battery life	200+ hours (coin cell: CR2032) when used as a single sided meter
Power range (Watts)	0 - 2500
Cadence range (rpm)	20 - 220
Water resistance rating	IPX7

Options

Crank length	165mm, 167.5mm, 170mm, 172.5mm, 175mm

Additional Features

Active temperature compensation

Accelerometer based cadence measurement or the option to use a Hall-Effect based system with magnet (coming soon)

Wirelessly upgradable firmware

LED indicator for visual indication of battery levels and zero reset confirmation without connected app or headunit

Updated accelorometer and addition of gyroscope for improved cadence resolution

NFC tap to pair for some phones and devices

Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength

Compatibility

Crank Compatibility	Compatible with Shimano Octalink drive side crank arms.
Frame Compatibility	Most frames, see fit guide in our Support section
Software Compatibility	Stages Link, Training Peaks, Strava, Garmin Training Center and others
Device Compatibility	ANT+, Bluetooth Smart Ready

In the Box

Power meter

High quality CR2032 coin cell battery

Lifetime access to Stages Link for power meter management and firmware upgrade

2 months free access to Stages Link premium training and coaching features

Product Identification Card with Serial Number and ANT+ ID Number

User Guide

Stages Power L - Shimano XT M8000 629,00 €

Wed, 27 Jun 2018 12:35:01 +0200

The new single-sided Stages Power L meter is built on to a non-drive-side Shimano XT M8000 crank arm and is compatible with all Shimano Hollowtech II XT M8000 drivetrains.

Tour Proven

Active Temperature Compensation as standard equipment

Individual meter calibration for the most accurate results

Each Stages Power meter is calibrated individually to ensure a +/- 1,5% accuracy level, which is an industry best for non-scientific power meters.

Specifications

Accuracy	+/- 1,5% accurate in all conditions
Power meter housing	low profile design, with robust door interface. Tool free battery replacement on the left arm
Weight	Only adds 15g to base crank set
Battery life	200+ hours (coin cell: CR2032) when used as a single sided meter
Power range (Watts)	0 - 2500
Cadence range (rpm)	20 - 220
Water resistance rating	IPX7

Options

Crank length	165mm, 170mm, 175mm, 180mm

Additional Features

Active temperature compensation

Accelerometer based cadence measurement or the option to use a Hall-Effect based system with magnet (coming soon)

Wirelessly upgradable firmware

LED indicator for visual indication of battery levels and zero reset confirmation without connected app or headunit

Updated accelorometer and addition of gyroscope for improved cadence resolution

NFC tap to pair for some phones and devices

Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength

Compatibility

Crank Compatibility	Compatible with all XT M8000 drive side crank arms.
Frame Compatibility	Most frames, see fit guide in our Support section
Software Compatibility	Stages Link, Training Peaks, Strava, Garmin Training Center and others
Device Compatibility	ANT+, Bluetooth Smart Ready

In the Box

Power meter

High quality CR2032 coin cell battery

Lifetime access to Stages Link for power meter management and firmware upgrade

2 months free access to Stages Link premium training and coaching features

Product Identification Card with Serial Number and ANT+ ID Number

User Guide

Stages Power L / LR / R - Shimano Dura-Ace R9100 from0,00 €

Wed, 27 Jun 2018 15:30:27 +0200

The Stages Power meter for Shimano´s Dura-Ace R9100 crank set is available as Stages Power L (left-sided only), Stages Power LR (dual-sided) and Stages Power R (right-sided only) option.

Stages Power L	is built on to a non-drive side Shimano Dura-Ace R9100 crank arm and is compatible with all frames that fit Shimano Hollowtech II cranks.
Stages Power LR	is built on to a Shimano Dura-Ace R9100 crank set, placed on both the drive and non-drive side of the crank in order to independently measure a rider's left and right legs.
Stages Power R	is built on to a drive side Shimano Dura-Ace R9100 crank arm and is compatible with all frames that fit Shimano Hollowtech II cranks.

Tour Proven

Active Temperature Compensation as standard equipment

Individual meter calibration for the most accurate results

Each Stages Power meter is calibrated individually to ensure a +/- 1,5% accuracy level, which is an industry best for non-scientific power meters. Individual calibration for the dual-sided option means that you can trust the data produced by our system, as it's a real measurement and not an estimation.

Stages Power R drive-side meter for added compatibility or upgrading an existing Stages Power L meter to Stages Power LR

While not widespread there are some key bicycle models that are not compatibile with the non-drive crank arm based Stages Power meter because of interference with the power meter housing, for example Cervelo's P5 and many bikes with chainstay mounted brake calipers. Stages Power R offers increased compatibility with these models as well as the ability to upgrade existing Stages Power L power meters to Stages Power LR (dual) meter systems.

Specifications

Accuracy:	+/- 1,5% accurate in all conditions
Power meter housing	low profile design, with robust door interface. Tool free battery replacement on the left arm and phillips head screw access on the drive side
Weight	Only adds 35g (Stages Power LR) / 15g (Stages Power L) / 20g (Stages Power R) to base crank set
Battery life	175+ hours (Stages Power LR, via 2 coin cell: CR2032), 200+ hours (coin cell: CR2032) when used as a single sided Stages Power L or Stages Power R meter
Power range (Watts)	0 - 2500
Cadence range (rpm)	20 - 220
Water resistance rating	IPX7

Options

Stages Power L	Crank length 165mm, 167.5mm, 170mm, 172.5mm, 175mm, 177.5mm, 180mm
Stages Power LR	Crank length 165mm, 170mm, 172.5mm, 175mm Chainrings 50/34, 52/36, 53/39
Stages Power R	Crank length 165mm, 170mm, 172.5mm, 175mm

Additional Features

Active temperature compensation

Accelerometer based cadence measurement or the option to use a Hall-Effect based system with magnet (coming soon)

Wirelessly upgradable firmware

LED indicator for visual indication of battery levels and zero reset confirmation without connected app or headunit

Updated accelorometer and addition of gyroscope for improved cadence resolution

NFC tap to pair for some phones and devices

Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength

Compatibility

Stages Power L	is compatible with all Shimano Hollowtech II road drive side crank arms.
Stages Power LR	is compatible with all Shimano Hollowtech II, 11-speed, road drivetrains.
Stages Power R	is compatible with all Shimano Hollowtech II road left arms, but is only compatible with Dura-Ace R9100 or R8000 chainrings. *Does not include chainrings

Frame Compatibility	Most frames, see fit guide in our Support section
Software Compatibility	Stages Link, Training Peaks, Strava, Garmin Training Center and others
Device Compatibility	ANT+, Bluetooth Smart Ready

In the Box

Stages Power L	Non-drive-side power meter High quality CR2032 coin cell battery
Stages Power LR	Non-drive-side power meter Drive-side power meter Shimano chainrings 2x high quality CR2032 coin cell battery
Stages Power R	Drive side power meter High quality CR2032 coin cell battery

Lifetime access to Stages Link for power meter management and firmware upgrade.

2 months free access to Stages Link premium training and coaching features.

Product Identification Card with Serial Number and ANT+ ID Number.

User Guide

Stages Power L / LR / R - Shimano Ultegra R8000 from0,00 €

Wed, 27 Jun 2018 17:32:31 +0200

The Stages Power meter for Shimano´s Ultegra R8000 crank set is available as Stages Power L (left-sided only), Stages Power LR (dual-sided) and Stages Power R (right-sided only) option.

Stages Power L	Built on to a non-drive side Shimano Ultegra R8000 crank arm and is compatible with all frames that fit Shimano Hollowtech II cranks.
Stages Power LR	Built on to a Shimano Ultegra R8000 crank set, placed on both the drive and non-drive side of the crank in order to independently measure a rider's left and right legs.
Stages Power R	Built on to a drive side Shimano Ultegra R8000 crank arm and is compatible with all frames that fit Shimano Hollowtech II cranks.

Tour Proven

Active Temperature Compensation as standard equipment

Individual meter calibration for the most accurate results

Each Stages Power meter is calibrated individually to ensure a +/- 1,5% accuracy level, which is an industry best for non-scientific power meters. Individual calibration means that you can trust the bi-lateral data produced by our system, as it's a real measurement and not an estimation.

Stages Power R drive-side meter for added compatibility or upgrading an existing Stages Power L meter to Stages Power LR

Specifications

Accuracy	+/- 1,5% accurate in all conditions
Power meter housing	low profile design, with robust door interface. Tool free battery replacement on the left arm and phillips head screw access on the drive side
Weight	Only adds 35g (Stages Power LR) / 15g (Stages Power L) / 20g (Stages Power R) to base crank set
Battery life	175+ hours (Stages Power LR, via 2 coin cell: CR2032), 200+ hours (coin cell: CR2032) when used as a single sided Stages Power L or Stages Power R meter
Power range (Watts)	0 - 2500
Cadence range (rpm)	20 - 220
Water resistance rating	IPX7

Options

Stages Power L	Crank length 165mm, 170mm, 172.5mm, 175mm
Stages Power LR	Crank length 165mm, 170mm, 172.5mm, 175mm Chainrings Compact 50/34, Mid-compact 52/36, Standard 53/39
Stages Power R	Crank length 165mm, 170mm, 172.5mm, 175mm

Additional Features

Active temperature compensation

Accelerometer based cadence measurement or the option to use a Hall-Effect based system with magnet (coming soon)

Wirelessly upgradable firmware

LED indicator for visual indication of battery levels and zero reset confirmation without connected app or headunit

Updated accelorometer and addition of gyroscope for improved cadence resolution

NFC tap to pair for some phones and devices

Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength

Compatibility

Stages Power L	Compatible with all Shimano Hollowtech II road drive side crank arms.
Stages Power LR	Compatible with all Shimano Hollowtech II, 11-speed, road drivetrains.
Stages Power R	Compatible with all Shimano Hollowtech II road left arms, but is only compatible with Dura-Ace R9100 or R8000 chainrings. *Does not include chainrings.

Frame Compatibility	Most frames, see fit guide in our Support section
Software Compatibility	Stages Link, Training Peaks, Strava, Garmin Training Center and others
Device Compatibility	ANT+, Bluetooth Smart Ready

In the Box

Stages Power L	Non-drive-side power meter High quality CR2032 coin cell battery
Stages Power LR	Non-drive-side power meter Drive-side power meter Shimano chainrings 2x high quality CR2032 coin cell battery
Stages Power R	Drive side power meter High quality CR2032 coin cell battery

Lifetime access to Stages Link for power meter management and firmware upgrade

2 months free access to Stages Link premium training and coaching features

Product Identification Card with Serial Number and ANT+ ID Number

User Guide

Stages Power L - Shimano Saint M820/825 0,00 €

Sat, 26 May 2018 06:01:47 +0200

The new single-sided Stages Power L meter is built on to a non-drive-side Shimano Saint crank arm and is compatible with all Shimano Saint and DXR Hollowtech II drivetrains.

Tour Proven

Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’’s best product proving ground, then Stages Power is proven as the world’’s best power meter.

Active Temperature Compensation as standard equipment

Individual meter calibration for the most accurate results

Each Stages Power meter is calibrated individually to ensure a +/- 1,5% accuracy level, which is an industry best for non-scientific power meters.

Specifications

Accuracy	+/- 1,5% accurate in all conditions
Power meter housing	low profile design, with robust door interface. Tool free battery replacement on the left arm
Weight	Only adds 15g to base crank set
Battery life	200+ hours (coin cell: CR2032) when used as a single sided meter
Power range (Watts)	0 - 2500
Cadence range (rpm)	20 - 220
Water resistance rating	IPX7

Options

Crank length	165mm, 170mm

Additional Features

Active temperature compensation

Accelerometer based cadence measurement or the option to use a Hall-Effect based system with magnet (coming soon)

Wirelessly upgradable firmware

LED indicator for visual indication of battery levels and zero reset confirmation without connected app or headunit

Updated accelorometer and addition of gyroscope for improved cadence resolution

NFC tap to pair for some phones and devices

Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength

Compatibility

Crank Compatibility	Compatible with Shimano Saint and DXR Hollowtech II drive side crank arms.
Frame Compatibility	Most frames, see fit guide in our Support section
Software Compatibility	Stages Link, Training Peaks, Strava, Garmin Training Center and others
Device Compatibility	ANT+, Bluetooth Smart Ready

In the Box

Power meter

High quality CR2032 coin cell battery

Lifetime access to Stages Link for power meter management and firmware upgrade

2 months free access to Stages Link premium training and coaching features

Product Identification Card with Serial Number and ANT+ ID Number

User Guide

Stages Power L - Shimano XTR M9000/M9020 0,00 €

Wed, 27 Jun 2018 12:35:01 +0200

The new single-sided Stages Power L meter is built on to a non-drive-side Shimano XTR M9000 or M9020 crank arm and is compatible with XTR Shimano Hollowtech II drivetrains.

Tour Proven

Active Temperature Compensation as standard equipment

Individual meter calibration for the most accurate results

Each Stages Power meter is calibrated individually to ensure a +/- 1,5% accuracy level, which is an industry best for non-scientific power meters.

Specifications

Accuracy	+/- 1,5% accurate in all conditions
Power meter housing	low profile design, with robust door interface. Tool free battery replacement on the left arm
Weight	Only adds 15g to base crank set
Battery life	200+ hours (coin cell: CR2032) when used as a single sided meter
Power range (Watts)	0 - 2500
Cadence range (rpm)	20 - 220
Water resistance rating	IPX7

Options

Crank length	M9000: 170mm, 175mm M9020: 165mm, 170mm, 175mm, 180mm

Additional Features

Active temperature compensation

Accelerometer based cadence measurement or the option to use a Hall-Effect based system with magnet (coming soon)

Wirelessly upgradable firmware

LED indicator for visual indication of battery levels and zero reset confirmation without connected app or headunit

Updated accelorometer and addition of gyroscope for improved cadence resolution

NFC tap to pair for some phones and devices

Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength

Compatibility

Crank Compatibility	Compatible with Shimano XTR Hollowtech II drive side crank arms.
Frame Compatibility	Most frames, see fit guide in our Support section
Software Compatibility	Stages Link, Training Peaks, Strava, Garmin Training Center and others
Device Compatibility	ANT+, Bluetooth Smart Ready

In the Box

Power meter

High quality CR2032 coin cell battery

Lifetime access to Stages Link for power meter management and firmware upgrade

2 months free access to Stages Link premium training and coaching features

Product Identification Card with Serial Number and ANT+ ID Number

User Guide

Stages Power L - Shimano 105 5800 569,00 €

Wed, 27 Jun 2018 12:35:00 +0200

The new single-sided Stages Power L meter is built on to a non-drive-side Shimano 105 5800 crank arm and is compatible with all Shimano Hollowtech II road drivetrains.

Tour Proven

Active Temperature Compensation as standard equipment

Individual meter calibration for the most accurate results

Each Stages Power meter is calibrated individually to ensure a +/- 1,5% accuracy level, which is an industry best for non-scientific power meters.

Specifications

Accuracy	+/- 1,5% accurate in all conditions
Power meter housing	low profile design, with robust door interface. Tool free battery replacement on the left arm
Weight	Only adds 15g to base crank set
Battery life	200+ hours (coin cell: CR2032) when used as a single sided meter
Power range (Watts)	0 - 2500
Cadence range (rpm)	20 - 220
Water resistance rating	IPX7

Options

Crank length	165mm, 170mm, 172.5mm, 175mm

Additional Features

Active temperature compensation

Accelerometer based cadence measurement or the option to use a Hall-Effect based system with magnet (coming soon)

Wirelessly upgradable firmware

LED indicator for visual indication of battery levels and zero reset confirmation without connected app or headunit

Updated accelorometer and addition of gyroscope for improved cadence resolution

NFC tap to pair for some phones and devices

Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength

Compatibility

Crank Compatibility	Compatible with all Shimano Hollowtech II road drive side crank arms.
Frame Compatibility	Most frames, see fit guide in our Support section
Software Compatibility	Stages Link, Training Peaks, Strava, Garmin Training Center and others
Device Compatibility	ANT+, Bluetooth Smart Ready

In the Box

Power meter

High quality CR2032 coin cell battery

Lifetime access to Stages Link for power meter management and firmware upgrade

2 months free access to Stages Link premium training and coaching features

Product Identification Card with Serial Number and ANT+ ID Number

User Guide